2014 Falkor Spring Quality Assessment Report Vessel: R/V Falkor Multibeam System: EM302/EM710 Dates: February 4-7, 2014 The transducer impedances are similar to baseline measurements in 2012 and with those taken in 2013. Continue Reading →
2014 Falkor Fall Quality Assessment Report Vessel: R/V Falkor Multibeam System: EM710/EM302 Dates: September 22-24, 2014 The R/V Atlantis replaced its EM122 multibeam echosounder with an EM124 upgrade during the 2020-21 mThe EM302 and EM710 multibeams were successfully calibrated and verified for use with both the loaner Seapath MRU and the new POS MV. Continue Reading →
2013 Falkor Multibeam Echosounder System Review Vessel: R/V Falkor Multibeam System: EM710/EM302 Dates: April 2, 2012 The transducer impedances are similar to baseline measurements with exception of the EM710 transducer impedances. Continue Reading →
2013 NOAA Ship Rainier Multibeam System Review Vessel: Rainier Multibeam System: EM710 Dates: June 2013 Sensor geometry reconfiguration was successfully completed and tested on Rainier and a 14 ms orientation time delay was applied in SIS to accommodate an observed latency in the transmission of motion data from the POSMV to SIS. Continue Reading →
2012 Kilo Moana Sea Acceptance Report Cruise ID: KM1212 Multibeam System: EM122/EM710 Dates: June 21-24, 2012 The EM122 and EM710 systems both appear to be configured correctly and, for the most part, adequately calibrated. Continue Reading →
2012 Kilo Moana Quality Assurance Report Cruise ID: KM1204 Multibeam System: EM122/EM710 Dates: March 13-22, 2012 The point of the QAT visit was to help the host institution in developing protocols and practices that are conducive to the acquisition of high quality multibeam data. Continue Reading →
2012 Falkor Multibeam Echosounder System Review Vessel: R/V Falkor Multibeam System: EM302/EM710 Dates: May 2012 RV Falkor is equipped with Kongsberg Maritime (KM) EM302 and EM710 multibeam echosounders (MBES). Continue Reading →